nvtanswers - How do I install the EC Extender Kit?
How do I install the CLEER24?
Can I use an EC Extender Kit with a PoE switch to power a camera?
How do I install entry protection in conjuction with the NV-EC1701?
What is included in each EC Extender Kit?
Why does the EC-Base have a toggle?
No power EC-Link.
Can the NV-EC1701-KIT4 support Four PoE Class 3 Cameras?
How do you join the NV-EC1701 transceivers?
Is the NV-EC1701 Plenum Rated?
How do I prepare to install the PoLRE switch?
What would you like to know?
< Back to search results
How do I install the EC Extender Kit?
Test the coax cable for shorts or grounds, ensure that the BNC connections are properly terminated.
Remove legacy devices connected on the coax. Any non-IP devices connected may be damaged if left connected.
RJ45 connector labeled “To switch” to a downlink port on the switch.
Connect coax cable to the
BNC connector labeled “To LRE” and to the BNC connector of
, labeled “To
Using Cat5 or better connect the end device to the
, labeled “To Endpoint”.
Was this article helpful?
Please tell us how we can make this article more useful.