nvtanswers - How do I install the EC Extender Kit?
 
Reset Search
 

 

Article

How do I install the EC Extender Kit?

« Go Back

Information

 
Answer
 
  • Test the coax cable for shorts or grounds, ensure that the BNC connections are properly terminated.
  • Remove legacy devices connected on the coax. Any non-IP devices connected may be damaged if left connected.
  • Connect the EC-Base RJ45 connector labeled “To switch” to a downlink port on the switch.
  • Connect coax cable to the EC-Base's BNC connector labeled “To LRE” and to the BNC connector of EC-Link+/EC-4, labeled “To LRE/ EoC” respectively.
  • Using Cat5 or better connect the end device to the EC-Link+/EC-4, labeled “To Endpoint”.


                EC-Base                           EC4                              EC-Link    
                                                     
      User-added image

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255