nvtanswers - How do I install the CLEER24?
 
Reset Search
 

 

Article

How do I install the CLEER24?

« Go Back

Information

 
Answer

Mount the CLEER24 in a suitable location, unplug your legacy system from the infrastructure that will be connected to the CLEER24. Warning: the CLEER24 can damage legacy equipment if it is left connected. Connect the AC cable and optional grounding connection, turn on the CLEER24. NOTE: Prior to connecting the existing infrastructure with the CLEER24, you need to ensure that the ends are already terminated, attempting cable termination after the switch is powered on will cause damage to the switch and any connected adapters. Connect the CLEER24 line Interfaces to the prepared BNC connectors of the present infrastructure. Connect the CLEER24 GBE1 port directly to an Ethernet device. Connect the EC-Link to the coax connection at desired wall locations. Connect the chosen IP device to the RJ45 port on the EC-Link. The CLEER24's GBE ports are set by default to a daisy chain configuration. If a redundant network topology is required please refer to the CLEER24 manuals or www.nvtphybridge.com for configuration information.

                  
                                   
                                                                                                                  CLEER24                                                       EC-Link
                                                                                User-added image

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255